SAP custom solutionPreviously I explained the two primary types of implementations– with SAP or any other ERP package, you will do business process engineering or software engineering. The differences in these two types of implementation approaches will have a major impact on your total cost of ownership (TCO) and your long-term application lifecycle costs.

——————————-

Software Engineering or Business Process Engineering?
https://www.iitrun.com/sap-implementation-focus-software-engineering-or-business-process-engineering
April 29, 2010

You can implement SAP (or any ERP system) through two major ways in your company; you make your company fit the software, or you make the software fit your existing processes. These two methods provide the end-point markers or goal posts and all implementations fall somewhere between them.

No matter which route you choose, you should have clear business justifications for the approach you take. In other words, do you have specific processes that are part of your core value proposition, or processes that create significant competitive advantage in the marketplace? If your processes are that unique to your business model, are there other ways to gain the same process advantages? These types of key questions clarify whether or not you have a business justification for one approach or another.

——————————-

Software Engineering (SAP or ERP Custom Coding) Still Requires Change Management

If you choose the software engineering route (changing the system to match your business), you still need change management processes, but the transition will not be as extensive. Upfront development costs will be far higher, long-term support will be far more expensive, and depending on the extent of the custom solution, you will be tied into a particular vendor.

Generally, less experienced consultants choose the software engineering route over business process engineering because it reduces their experience requirements. They can easily insist that only a custom solution will work if they do not know how to use, setup, or support some standard functionality in SAP (see e.g. A Cautionary Tale About SAP Knowledge Transfer). This is also the “cop-out” approach when some consultants (or system integrators) do not know how to guide a business through the critical change management and knowledge transfer efforts needed to accept new processes or concepts.

In some limited situations, you do need to change the software (or doing custom coding) to match your business. If it is truly lined up with business goals and objectives, or if it addresses marketplace or competitive pressures, then the custom development may be justified.

On the other hand, if you are trying to avoid the difficult change management process in areas of the business that do not directly affect competitive pressures or reduce costs, etc., then it is probably not justified. Instead, you are better to engage in the intense change management strategies and processes to make the transition to a new way of operating.

In the short term, custom-coded solutions may appear to fit your current business environment, and a custom solution may reduce some of the resistance to change, but you will face longer term consequences. As long as you rely on custom coding to modify the system, you are locked into your original vendor. If you need something changed later, or if you want to add additional functionality, you no longer have the option of selecting any number of qualified or skilled consultants from the general marketplace. Therefore, you have less leverage to contain costs (see ERP Consultants: Is the Promise of Knowledge Transfer just part of the Sales Pitch?). While the change management costs may be lower initially by changing the software, those costs are simply transferred to other areas of the project– often at a much higher cost. If you decide to modify a package application such as SAP, then you will pay a higher cost for developer time than for the change management and training effort. You will also have far higher support and maintenance costs, making your entire application lifecycle far more expensive (see SAP Implementation Focus, Software Engineering or Business Process Engineering?).

SAP Custom-Coded Solutions Introduce Significant SAP Project Risk

As the number and complexity of development objects increases the risks to business operations increases. This statement may seem obvious before a project begins, during testing, or after a project is finished, but in the heat of an implementation it can easily be overlooked. Along with this, to the extent that business operations are subject to risk so is a company’s financial performance.

Every time you custom code an SAP solution you introduce potential performance problems, additional processing overhead, potential coding mistakes, and worst of all, unforeseen process problems and gaps. Along with these risks you do not have the benefit of the dozens, or hundreds, or in some cases even thousands of previous customers who have used, tested, fixed, and worked through the issues with new functionality offered by the application vendor.

It is all too common to find numerous bugs and fixes in custom programs once a system goes into the live production state. Even the best coders can rarely account for every nuance, variance, variable, or processing option that might occur. When the development becomes even more complex, you need even more to evaluate whether there are standard system options which can handle some or all of the requirements. Complex development often leads to much more significant bugs, including in areas that they might integrate to or transfer any data to or from.

Unplanned ERP Application Maintenance Costs Escalate Over Time

Once the custom coding is completed, if the software vendor releases patches or fixes to other functionality, or if you find a problem that the software vendor has a fix for, you may in turn break some of your custom-coded solutions. Once those are broken, your business operations may suffer, and you are at the mercy and cost of getting the custom development fixed. On any large package application such as SAP, you will likely be applying fixes (SAP OSS Notes) to the system from time to time for several years. This doesn’t mean that the software is necessarily buggy– only that small nuances, optional functions, or even regulatory/compliance issues have been addressed that you might benefit from. Each application of these changes then requires more extensive regression testing because of the custom-coded solutions.

Custom Coded Solutions (Software Engineering) Limits Your Training Options

For the custom solutions and the customized functionality, you no longer have the option of going to the SAP training programs to learn the system functionality (so you can configure it yourself). You are tied to the original vendor at premium rates to maintain your system. If the customizations are extensive enough, you will be pressed to use the original vendor to do any future upgrades or system work. Essentially, you have cut yourself off from competitive bidding because a complete re-implementation may be too cost prohibitive in the short term.

Expect much higher application lifecycle costs. Are you ready to be the only customer with that specific solution that is not supported by the application vendor (except at super-premium rates)?

An Example of a Necessary SAP Custom Solution With Business Justification

Don’t get me wrong– there are times when a custom coded solution is necessary. While SAP’s application is very broad and very deep, it still has some gaps, or you may have some genuinely unique requirement.

For example, I was at a client who wanted a Trade Promotion Execution solution. Not just reporting or analytic functionality (like the CRM solution), but a true sales and marketing execution cockpit. This cockpit had to be completely flexible so that they could do any mix of products, in any quantity they defined, to qualify for either additional free items or additional items at a discount. On top of that, it had to be able to have limits so that as certain thresholds were reached, within a certain period of time, the customer would no longer be eligible for the promotion, or they would qualify for a different promotion.

The requirements and flexibility were so comprehensive that the solution would have entailed an entirely new application sub-module from SAP. As a result, I worked with them to design and implement a custom solution to handle all of these requirements. This was mission critical for them, it was aligned with a key business need, and it was focused on customer retention and acquisition. This was all done within the existing SAP provided order processing framework. On occasion, I provide limited support for this custom solution, but it was well documented, tested, and trained before I left. Additionally, they were fairly independent. In over a year in production the solution has only had a couple of minor issues, and it has worked well for them with numerous creative order and marketing requirements.

Their sales and marketing programs have allowed them to profitably grow at a greater rate than any of their other competitors. This growth and profitability has occurred during a major economic downturn. I can’t say that my solution is completely responsible for that, but what I can say is that they were a sophisticated SAP shop that had clear processes and marketing requirements. The solution enabled them to be more efficient and effective with their marketing programs, reducing the previous four to eight week development (custom coding), testing, approval, and roll out time line for each promotion or sales program to only a few days. They also gained additional analytics of program and promotion effectiveness. This solution has allowed them to be proactive in customer acquisition and almost instantly reactive to competitors for customer retention. At the time of this article, their competitors have no competing solution and are subject to highly manual processes or long lead time custom solutions.

In this case, the custom development was clearly connected to a specific business requirement that was mission critical and focused on customer and revenue growth. In my opinion, that is certainly an appropriate justification for a custom solution.

SAP or ERP Custom Solutions Still Need Sufficient Knowledge Transfer and Documentation

Good knowledge transfer techniques and plans require every small section of custom code to be extremely well documented. In the example above, the client did the testing and was thoroughly trained on the custom solution, the dependencies, the master data requirements, the implications of master data throughout the process, the use of the coding, etc. They carried out a thorough knowledge transfer process with the critical techniques and methods for their long-term independence.

Sometimes, a custom solution is necessary, but could you imagine a “con”sultant** trying to do this without deep knowledge and understanding of SAP’s Sales functionality? This company had been told several times, by several “con”sultants**, that what they wanted to do could not be done and there wasn’t an aftermarket product to support their need.

Conclusion on Custom SAP Solutions and Application Life-Cycle Support Costs

The costs and consequences of custom solutions to overall lifecycle support are generally far higher than they may initially appear. For example, clients need to consider the following:

  • initial developer cost,
  • the application consultant’s time,
  • additional documentation,
  • additional knowledge transfer,
  • additional testing beyond standard functionality requirements,
  • long-term (unplanned) support costs with the incumbent vendor,
  • no standard or vendor provided training,
  • changes, fixes, or bugs are not included in vendor maintenance payments,
  • additional upgrade testing or “lock in,”
  • paid vendor maintenance breaking custom solutions which requires additional rework,
  • costly SAP note support for fixes, enhancements, and even regulatory or compliance adjustments,
  • etc.

If you do not have a strong business justification for a custom solution, you are much better off trying to make the standard system functionality work. To the extent you do, you will reduce overall long-term support and maintenance costs. When you reduce the number and amount of custom solutions when you need to upgrade, your change management and testing time will be significantly reduced. You will have already made the initial process change requirements by changing to standard system options. Additionally, you will not have to verify, fix, and extensively retest all of the custom development. Standard functionality is supported by the software vendors’ normal patches, fixes, or OSS Note based enhancements.

In the end, carefully consider the cost/benefit ratio for any custom coded requirement. Sometimes, custom-coded SAP or ERP solutions make good business sense; other times, they are a train wreck waiting to happen.

Related Posts on SAP Change Management, Knowledge Management, and Training

——————————-

Change Management Strategies and Knowledge Transfer Processes for a Successful SAP Project

May 24, 2010

People, organizational, and change management strategies on an ERP implementation are usually more difficult than the technology implementation. One of the biggest problems in workforce preparation for ERP applications is the type of training they receive. The types of training you decide to use are all part of the knowledge transfer strategies, techniques, or methods to support business transformation.

Most companies only perform the traditional scripted keyboard training, which consists of carefully controlled individual transaction exercises. The typical system implementation focuses on training individual transactions without the explanation of dependencies or processes. This works for initial exposure to the system– for learning the user interface and the new data entry requirements. Typical training methods generally do not transfer process related knowledge critical for success such as:

  • The significance of the data that is entered.
  • Where that data is integrated into other parts of the system.
  • What the underlying data dependencies are.
  • What types of troubleshooting steps to take.
  • What interdepartmental impacts exist.
  • What part of the overall process is affected.
  • Etc.

Together with these common gaps in knowledge transfer techniques and methods, there is little ongoing follow-up after the system is live such as:

  • Communications about maintenance or performance tips and tricks after the system is live.
  • Additional troubleshooting training or techniques as they arise.
  • Where to find key data and information for decision making.
  • Etc.

===========================

** Please pardon my periodic references to the con artists (“con”sultants) in the marketplace. My frustration with the frauds and cons in the marketplace is the amount of damage they have done. Frankly, I believe it is a testament to SAP’s ability to produce implementation methodologies and control structures that the sheer number of frauds in the marketplace have not destroyed far more implementations. I’ve paid my dues and have worked my way through the ranks in:

  • training,
  • then to configuration,
  • to project / module lead positions,
  • through numerous full-cycle projects in multiple modules,
  • to project management,
  • and then out on my own as an independent contractor,
  • and then to trying to strategically grow a business with only the very best,
  • to overall solution architecture,
  • and on to enterprise architecture,
  • and to executive leadership in a large consulting firm.

——————————-

Leading Change (and Change Management)

May 17, 2010

While few debate that the successful implementation of change can create an extreme competitive advantage, not many understand that the lack of doing so can send a company (or an individual’s career) into a death spiral. Companies that seek out and embrace change are healthy, growing, and dynamic organizations, while companies that fear change are stagnant entities on their way to a slow and painful death.

Agility, innovation, disruption, fluidity, decisiveness, commitment, and above all else a bias toward action, will lead to the creation of change. The implementation of change creates evolving, growing and thriving companies.

——————————-

A Cautionary Tale About SAP Knowledge Transfer

February 3, 2009

Genuinely seasoned consultants recognize that the time they have spent “in the trenches” cannot be replaced by one project’s knowledge transfer; therefore, they are not threatened by encouraging your understanding. Many talented consultants thrive in an environment where they are challenged, and learning, and solving problems. Because of this, transferring knowledge is second nature to a skilled and experienced consultant.

Most often the truly skilled consultants with practical business and work backgrounds are the ones who can speak to issues in plain, understandable terms. They have been through the go-lives. They have done the production support for the user community. They have had to work through the complex or thorny processing issues. They’ve seen where things were done right (and not so well), and they have gained a solid process understanding. They do not have to rely on “fast-talking techie speak” to keep you confused and in the dark. After all, if, you’re not clear on what they are saying, how are the project team and user community going to understand them?

——————————-

ERP Consultants: Is the Promise of Knowledge Transfer just part of the Sales Pitch?

February 10, 2010

Most ERP projects are filled with promises of software knowledge transfer from the consultants to the client. Yet once a project is over, in many cases, the client is clueless when it comes to making software configuration changes, and may even struggle with performing basic transactions in the system. So what gives?

Despite how many aim for knowledge transfer, few have a real strategy to make it more than just a dream. Secondly, when push comes to shove, this once important concept of learning suddenly becomes something we worry about later (and of course, it never happens). This is similar to consultants building a spaceship to get you to Mars with the understanding we will not plan the return trip until after you get there.

——————————-

Software Engineering or Business Process Engineering?

April 29, 2010

SAP (or any ERP system) can be implemented in your company in two primary ways. You make your company fit the software, or you make the software fit your existing processes. These two methods provide the end-point markers or goal posts and all implementations fall somewhere between them.

No matter which route you choose, you should have clear business justifications for the approach you take. In other words, do you have specific processes that are part of your core value proposition or processes which create significant competitive advantage in the marketplace? If your processes are that unique to your business model, are there other ways to accomplish the same process advantages? These types of key questions clarify whether or not there is a business justification for one approach or another.

——————————-

——————————-

Software Engineering or Business Process Engineering?
https://www.iitrun.com/sap-implementation-focus-software-engineering-or-business-process-engineering
April 29, 2010

There are two primary ways in which SAP (or any ERP system) can be implemented in your company; you make your company fit the software or you make the software fit your existing processes. These two methods provide the end-point markers or goal posts and all implementations fall somewhere between them. They present the classic options you have available, either you do a software re-engineering project or you do a business process re-engineering project.

No matter which route you choose, there should be clear business justifications for the approach you take. In other words, do you have specific processes that are part of your core value proposition or processes which create significant competitive advantage in the marketplace? If your processes are that unique to your business model are there other ways to accomplish the same process advantages? These types of key questions help to clarify whether or not there is a business justification for one approach or another.